home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-05 / aprint.zip / README24.TXT < prev   
Text File  |  1992-04-24  |  2KB  |  81 lines

  1.  
  2.        ┌───────────────────────────┐
  3.        │ NET SatisFAXtion Software │
  4.        │         Update for        │
  5.        │        AUTOPRNT.EXE       │
  6.        └───────────────────────────┘
  7.  
  8.  
  9. - WHAT IS NEW WITH AUTOPRNT
  10.  
  11. Speed! We have managed to squeeze out about a 20
  12. percent performance increase by improving the
  13. buffering algorithm. This should help those of you
  14. using NET SatisFAXtion as a plain paper fax
  15. solution.
  16.  
  17. - WHAT ELSE CAN BE DONE TO IMPROVE PRINTING SPEED?
  18.  
  19. Print in Standard mode instead of Fine mode. The
  20. loss in resolution is often acceptable for faster
  21. printing speed.
  22.  
  23. Don't print to postscript. Printing faxes to a
  24. postscript printer is much slower than other
  25. printing modes. If your printer supports both
  26. postscript and PCL mode, use the PCL mode.
  27.  
  28. Dedicate a PC to AUTOPRNT. Although AUTOPRNT can
  29. be run on the fax server, it will print much
  30. slower than on a workstation. The faster the
  31. computer, the faster AUTOPRNT can resize the image
  32. for printing.
  33.  
  34. Assign multiple printers to a Novell print queue.
  35.  
  36. Attach the printer directly to the system running
  37. AUTOPRNT.
  38.  
  39.    ┌───────────────────────┐
  40.    │ INSTALLING THE UPDATE │
  41.    └───────────────────────┘
  42.  
  43. INSTALLATION STEPS
  44.  
  45. - Simply copy the new AUTOPRNT.EXE file (extracted
  46. from the 24.EXE file) over the old AUTOPRNT.EXE.
  47. For example:
  48.  
  49.         COPY C:\TEMP\AUTOPRNT.EXE C:\FAX
  50.  
  51. - Run AUTOPRNT as usual.
  52.  
  53.    ┌────────────────────────────┐
  54.    │ AUTOPRNT ON THE FAX SERVER │
  55.    └────────────────────────────┘
  56.  
  57. - You can run AUTOPRNT on the fax server, but it
  58. will print very slowly. Also, the fax server must
  59. have at least 1M byte of expanded memory for
  60. AUTOPRNT to work. To run AUTOPRNT at the fax server,
  61. follow these steps:
  62.  
  63.         1. Use SERVESET to configure the fax server
  64.            for nondedicated mode.
  65.  
  66.         2. Use SETUP to set up the user software on
  67.            the fax server. Use AUTOPRINT as the fax
  68.            user name.
  69.  
  70.         3. Run FAXNODE and AUTOPRNT after the fax
  71.            server loads.
  72.  
  73. WARNING
  74.  
  75. - The extra overhead of printing could over tax a
  76.   busy fax server. This configuration is not
  77.   recommended for anything slower that a 386
  78.   system.If the performance degradation of the fax
  79.   server is unacceptable, you should run AUTOPRNT on
  80.   a separate workstation.
  81.